供应商信息:

公司: 深圳墨子星科技有限公司
地址: 深圳市龙华新区清湖硅谷动力竞凯大厦218室
联系人: 文泽勇
手机: 13760317096
QQ: 1534143131
微信: wenzeyong20111111
邮箱: 1534143131@qq.com

Database-1 

产品图片:

产品参数:

因工业化进程加速发展，导致空气质量不断下降，严重影响人类身体健康，人作为社会主体，担负的责任越来越大而健康的身体是最基本的保障，所以我们在努力工作的同时拥有健康的身体已成为必须。
Due to the accelerated development of the industrialization process, resulting in declining air quality, serious impact on human health, the human body as a society, more and more responsibilities and a healthy body is the most basic protection, so we work hard at the same time have a healthy the body has become a must.
我公司针对目前这一现状，组织专业团队精心研发一款空气质量预警仪，为您所处的生活场所空气质量实时监控预警，播报当前空气质量优劣。使您能有所警觉，成为你生活的小帮手。
Our view of the current status quo, developing a well-organized team of professionals air quality warning device, a place to live where you are in real-time air quality monitoring and warning, broadcast current air quality of the merits. So you can be alert, be your little helper life.

外观介绍：
Appearance：

1：校正/播报按键，空气状态指示灯
Debug / broadcast button, air status indicator
2：USB插座
USB socket
3：USB插头
USB plug
4：保护盖
protective cover
5：传感器通风孔
sensor Ventilation holes
技术指标
Technical Specifications
电  源：DC5V/300mA
Power source: DC5V / 300mA

指示灯：Indicator:
绿 （空气良好）污染指数上升值小于50
Green (good air) on the pollution index appreciation is less than 50
黄 （轻度污染）污染指数上升值小于100
Yellow (light pollution) pollution index appreciation is less than 100
橙 （中度污染）污染指数上升值小于200
The orange (moderate pollution) Pollution Index appreciation of less than 200
红 （严重污染）污染指数上升值大于200
Red (heavily polluted) on pollution index appreciation is greater than 200

使用指南
user’s guidance
一：通电开机
power on
打开保护盖，把USB插头插在任何USB供电设备。并且把设备放在需要监控的位置，通电1分钟左右即可播报当前的空气质量等级。
Open the protective cover, the USB plug in any USB-powered device. And on the location of the devices you want to monitor, power abo
ut 1 minute to broadcast the current air quality levels.
二：手动校正 Manual calibration
当首次使用或者更换了使用环境的情况下需要手动校正一次，当开机完毕后，就可执行校正。在此过程保持监控环境空气质量最佳，长按校正/播报按键。会进入校正模式，再按一次即可校正。待校正完毕。就可以正常监控当时的室内状况。
When the case of first use or replace the use of the environment require manual correction once, when the boot is complete, you can perform the correction. In this process remains the best ambient air quality monitoring, press correction / multicast keys. It will enter calibration mode, press once corrected. To be corrected is completed. It can normally monitor the situation at the time of the indoors.
三：注意事项 Precautions
1：设备校正完成后即可实时预警现场空气质量，使用温度为-10-50度湿度为0-95%
After the device calibration can be completed in real-time early warning site air quality, temperature -10-50 degrees humidity 0-95%
2：存放温度为-10-70度 湿度为0-50%
The storage temperature is -10-70 degrees humidity of 0-50%
3：任何时候禁止暴晒、淋雨、将产品放入高浓度的气体或液体中、或者直接使用高浓度气体直接喷向传感器部分。
Prohibited exposure, rain, high concentrations of the product into a gas or liquid, or using a high concentration of gas is directly sprayed directly to the sensor portion.